Street & Area Lighting
Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH are provided with each bolt.
The base plate is fabricated from ASTM A36 (carbon steel) or ASTM A240 (stainless steel). The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.
The pole shaft conforms to ASTM A1011 Grade 50 (carbon steel) or ASTM A240 Grade 201LN (stainless steel) standards and is formed with a constant linear taper
A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.
The pole may be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple fixtures, an adapter should be used. A removable pole cap is provided for poles specified with side drill luminaire mounting.
Carbon steel poles may be specified as hot-dip galvanized per ASTM A123 and/or finish painted with our standard Millerbond Wet Coat Finish. Multi-sided stainless steel poles may be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish. Round stainless steel poles must be finish painted with our standard Millerbond Wet Coat Finish.
All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength (carbon steel) or 18-8 (stainless steel).
Tap to expand details below