Contact UsProject QuotationEmployment
Decorative Lighting StandardsStainless Steel LightingStreet and Highway LightingTraffic Signal DesignTraffic ControlHigh MastSport and Area LightingHinged PoleAccessoriesMiscellaneous
 

Stainless Steel Lighting Standards

Model SD | Model SE | Model SI | Model SJR | Model SMV
Model ST | Model SV | Model SZ | Stainless Steel Transformer Base

 

Model "ST"
Stainless Steel Lighting Standard
Tenon Top Pole

The Model ST is a straight tapered one piece pole fitted with a standard 2 3/8" O.D. stainless steel tenon top. The pole shaft is formed into a tapered octagon in heights up to 35' and into a sixteen sided structure in heights 35' to 50'. The Model ST is constructed from high strength type 201L stainless steel with an after fabrication minimum yield strength of 60,000 PSI. Common applications are building entrance and walkway lighting or sidewalk and street lighting in urban malls.

Optional bases for the ST are:

    The enclosed "H" base is cold formed from the same type 201L stainless steel as the pole shaft and is riveted and welded to a formed stainless steel base plate also made of type 201L stainless steel.

    The standard anchor "A" base is made from 3/4" to 1 1/4" thick, type 304L stainless steel plate and is welded to the pole shaft with two circumferential welds.

    The stainless steel (AASHTO approved) breakaway "H" base is similar to the enclosed "H" base except that the base housing is fastened to the base plate with stainless steel rivets which are designed to shear under impact. (This base is designed to be replaced in the event of knockdown, allowing reuse of the pole shaft.)

Finish Options:

Base Styles:

 (Click Images for More Information)

Specifications:
The ST Lighting Pole is manufactured from high strength American made type 201L stainless steel which is .0721 thickness with an after fabrication minimum yield strength of 60,000 PSI. Poles up to 35 in height will be furnished with a tapered octagonal shaft. Poles 35 to 50 are furnished with a sixteen sided tapered shaft. The anchor "A" base is made from 304L stainless steel plate. Anchor base poles shall be equipped with a 3" x 5" hand hole with a reinforced frame. The hand hole cover is secured with a single tamper-resistant screw. The enclosed "H" base and the base plate shall be fabricated of the same high strength stainless steel as the shaft. The "H" base interior is accessible through a flush-mounted service door with a reinforced opening. The service door is secured with tamper-resistant screws. The anchor bolts shall be galvanized at least 12" on the threaded end. Each anchor bolt shall include two galvanized nuts.

Base

Mtg.

EPA

EPA

EPA

Weight

Dimensions

Anchor Bolt

Model

Options

Height

@80

@90

@100

(lbs.)

Base / Top

Circle / Size

No.

A

25'

4.5

2.5

1.4

113

6.68" / 3.26"

9.5" / 1" x 40"

8-STA1-250

H

25'

5.8

4

2.5

134

6.68" / 3.26"

15" / 1" x 40"

8-ST1-250

BB*

25'

5.8

4

2.5

134

6.68" / 3.26"

15" / 1" x 40"

8-STB1-250

A

30'

2

---

---

126

6.68" / 3.26"

9.5" / 1" x 40"

8-STA1-300

H

30'

2.8

1.3

---

146

6.68" / 3.26"

15" / 1" x 40"

8-SE1-300

BB*

30'

2.8

1.3

---

146

6.68" / 3.26"

15" / 1" x 40"

8-STB1-300

A

30'

4

2.2

---

151

8.15" / 3.26"

11" / 1" x 40"

8-STA3-300

H

30'

5.1

3.2

1.6

170

8.15" / 3.26"

15" / 1" x 40"

8-ST3-300

BB*

30'

5.1

3.2

1.6

170

8.15" / 3.26"

15" / 1" x 40"

8-STB3-300

A

35'

11.1

8.3

6.1

195

9.36" / 3.11"

12" / 1" x 40"HS

16-STA4-350

H

35'

12.6

9.5

7.3

211

9.36" / 3.11"

15" / 1" x 40"HS

16-ST4-350

BB*

35'

12.6

9.5

7.3

211

9.36" / 3.11"

15" / 1" x 40"HS

16-STB4-350

A

40'

7.8

5.5

3.7

224

9.36" / 3.11"

12" / 1" x 40"HS

16-STA4-400

H

40'

9

6.4

4.5

240

9.36" / 3.11"

15" / 1" x 40"HS

16-ST4-400

BB*

40'

9

6.4

4.5

240

9.36" / 3.11"

15" / 1" x 40"HS

16-STB4-400

A

50'

4.2

2.1

---

301

10.48" / 3.1"

13.5" / 1.25" x 48"HS

16-STA6-500

H

50'

5.2

3.1

1.6

315

10.48" / 3.1"

17" / 1.25" x 48"HS

16-ST6-500

BB*

50'

5.2

3.1

1.6

315

10.48" / 3.1"

17" / 1.25" x 48"HS

16-STB6-500

*BB = Breakaway "H" Base

Notes:
(I) Weight does not include anchor bolts.
(2) Foundation design must be specified by a Civil or Structural Engineer.
(3) Base of pole should never be grouted between the base plate and pole foundation
(4) Pole shafts up to 35' in height are octagonal in shape.
(5) Pole shafts 35' to 50' in height are sixteen sided.
(6) Anchor base poles can be ordered with transformer base options.
(7) Wind Load includes 1.3 Gust Factor
(8) Conforms to AASHTO Design Criteria
 




Home
| Decorative | Stainless Steel | Street & Highway | Traffic Signal Design | Traffic Control | High Mast | Sport & Area Lighting | Hinged Pole | Accessories | Miscellaneous

Contact Us | Literature Request | Project Quotation | Employment

Millerbernd Manufacturing Company
622 6th Street South
Winsted, Minnesota 55395
Phone: (320) 485-2111
Fax: (320) 485-4420