Street & Area Lighting
SJ1 (Tapered Arm) Carbon Steel
Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH.
The base plate is fabricated from ASTM A36 carbon steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.
Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.
Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance.
The pole shaft conforms to ASTM A240 Grade 201L stainless steel standards.
A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.
SJ1 arms are formed from 14 gauge ASTM A240 Grade 201L stainless steel. Each SJ1 arm attaches to the pole shaft with a three bolt simplex plate. Each SJ1 arm has a rise of 3 feet and 3 inches from the pole top and is fitted with a 2.38” diameter pipe adapter.
Stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.
All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.
Tap to expand details below