Decorative Outdoor Lighting
Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two flat washers and two hexagonal nuts.
The base plate is fabricated from ASTM A36 carbon steel or ASTM A240 stainless steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.
Round pole shafts conform to ASTM A500 Grade B standards for carbon steel tube. Octagonal and 16-sided shafts conform to ASTM A1011 Grade 50 carbon steel or ASTM A240 Grade 201L stainless steel standards.
A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.
The pole is be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple
fixtures, an adapter should be used. A removable pole cap shall be provided for poles specified with side drill
Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish. Stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.
All hardware and fasteners shall be supplied with each pole assembly. All structural fasteners shall be galvanized high-strength carbon steel or 18-8 stainless steel.
Tap to expand details below