Decorative Outdoor Lighting
Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two flat washers and two hexagonal nuts.
Each pole assembly is fashioned with a Millerbernd Manufacturing Company Decorative High Base. The base is fabricated from the same material as the pole shaft and stands 43 inches tall. The pole shaft is slip fitted and welded to the base.
The pole shaft conforms to ASTM A1011 Grade 50 carbon steel or ASTM A240 Grade 201L stainless steel standards and is formed with a constant linear taper.
A reinforced doorway with cover, grounding lug, and hardware is provided with each pole assembly.
Bemidji arms are fabricated from 2” (2.38” O.D.) schedule 40 pipe and are circumferentially welded to a cast decorative cap. The Bemidji arm is slip fitted over the pole top and is held in place with set screws. The Bemidji arm is formed with a soft “S” curve and has a rise of 3 feet above the pole top.
Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish. Multi-sided stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.
All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength carbon steel or 18-8 stainless steel.
Tap to expand details below