|
|
Stainless Steel Lighting
|
|
Reasons to consider Stainless Steel Poles:
- Zero-maintenance Shot Blasted "Soft"
Finish.
- Stainless Steel Poles can be Factory Finish
Painted in any available color and because
the underlying material is Stainless Steel the paint will adhere
much better and the pole
will last far longer than a painted galvanized or an anodized
aluminum pole. Life expectancy
for a Stainless Steel Pole is up to 100 years or more.
- Life expectancy three times longer than aluminum,
fiberglass or galvanized poles.
- Highly resistant to damage by salt spray,
acid rain or other airborne contaminates.
- Environmentally friendly, recyclable, contains
no preservatives to leach into ground water.
- Stronger and lighter than aluminum poles.
- Unaffected by mowers, weed whips & rodents
which damage fiberglass.
- Can’t burn like wood or fiberglass poles.
- Unique breakaway base allows reuse of pole
shaft on a high percentage of knockdowns.
- Prices competitive with tapered aluminum
poles.
Stainless Steel
Finishes
|
|
|
Model “SD” Lighting Standard
The Model SD is a single piece, multi-sided, stainless steel lighting pole which is formed in an integral curved davit shape. The shaft is tapered octagon in heights up to 35' and sixteen
sided in heights from 35' to 50' with 6', 8' and 12' Mastarms
|
|
|
Model “SE” Lighting Standard
The Model SE is an original Millerbernd design, the first of the popular davit style lighting standards. It has strength with out external braces and a simple beauty without ornamentation.
|
|
|
Model “SI” Lighting Standard
The Model SI is fitted with a tapered
inclined beam arm that is an integral part of the pole shaft.
The arm is set with a slight rise above the pole top for an attractive
appearance.
|
|
|
Model “SJR” Lighting Standard
Corrosion resistant stainless steel with a sand-blasted frost finish is used to create an octagonal tapered pole with an elegant appearance that will resist corrosive atmospheres.
|
|
|
Model “SMV” Lighting Standard
The Model SMV is constructed from high strength type 201L stainless steel with an after fabrication minimum yield strength of 60,000 PSI.
|
|
|
Model “ST” Lighting Standard
The Model ST is a straight tapered one piece pole fitted with a standard 2 3/8" OD stainless steel tenon top. The pole shaft is formed into a tapered octagon in heights up to 35' and
into a sixteen sided structure in heights 35' to 50'. Common applications are building entrance, walkway, sidewalk and street lighting in urban mall areas.
|
|
|
Model “SV” Lighting Standard
The Model SV is constructed from high strength type 201L stainless steel with an after fabrication minimum yield strength of 60,000 PSI. The pole shaft is a tapered octagon in heights up to 35' and
sixteen sided in heights from 35' to 50'.
|
|
|
Model “SZ” Lighting Standard
This stainless steel lighting pole is constructed from high strength type 201L stainless steel with an after fabrication minimum yield strength of 60,000 PSI.
|
|
|
Stainless Steel Transformer “T” Base
Finally, a transformer base that can stand up to the harsh environments of roadways and street corners. If you are replacing existing transformer bases, because their bottom plates & sidewalls
have been weakened by corrosion, you need the Millerbernd Stainless Steel Transformer Base!
|
