Round Tapered
Post Top Tenon Lighting Standards

A tapered one piece round shaft with a tenon top designed for light duty installation. Useful for entrance and walkway lighting, or for roadway lighting when adding the N, V, or MV style arms.

Base:
Flame cut plate steel joined to he pole base with exterior and interior continuous welds. Four anchor bolts are included.

“3" Pole Top - “A” Style Base

“4" Pole Top - “A” Style Base

Finishes:

• Available Steel Pole Finishes

Notes:
(1) Other heights available, contact factory.
(2) Maximum EPA recommended (100 MPH). Exceeding this maximum nullifies Millerbernd's warranty and any liability.
(3) Slipfitter dimensions: 2 3/8" O.D. x 6” standard. Specify if other is required.
(4) Weight includes pole, base. Does not include weight of anchor bolts.
(5) N, V and MV style roadway arms are available on 4" pole tops only.

NOTE: Foundation design must be specified or approved by a structural or civil engineer. DO NOT grout between the base plate and foundation

Welded tenon top
Type - 1S

Tenon Top or Side Mount
Millerbernd’s standard Round tapered PT pole includes a welded in place 2” pipe (2 3/8” O.D.) tenon (Type - 1S). To designate this specific mounting, simply add the Type extension to the pole Model Number.

OR

Side mount face drilling option includes drilled and tapped mounting holes and a round pole cap. (Type - 1FS)

Example: 11RA723300-1FS
 

Side mount face plate
Type - 1FS

Two light bracket
Type -2

Luminaire Brackets
Optional brackets can be supplied to offer a wide variety of luminaire mountings. Fabricated from standard 2” pipe (2 3/8” O.D.) in either carbon steel for prime painting, or self-weathering steel. The center “can” slipfits the pole top and is secured by 1/2” set screws. These brackets are available on both 3” and 4” pole tops. To designate a specific bracket mount, add the Type extension to the model number.
Example: 11RA723300-2 (2-light slipfit bracket)
 

Roadway mastarms
Type / N
N6 = 6’ extension
N8 = 8’ extension
“N” arms add 12” to luminaire mount height

Roadway Lighting Extensions
Optional luminaire extensions (arms) can be supplied for the 4” top poles only. These are available in three styles, the “N”, “V” and “MV” and are offered as either 6’ or 8’ extensions with 2” pipe (2 3/8” O.D.) slipfitters. To designate a specific arm style, add the Type extension to the model number.
Example: 11RA824300/N6 (denotes a 30’ Round pole with a 6’ “N” style mastarm.) 31’ actual luminaire mounting height.

Example: 11RA824300/V8 (denotes a 30’ Round pole with an 8’ “V” style mastarm.) 33’-3” actual luminaire mounting height.

Example: 11RA824300/MV8 (denotes a 30’ Round pole with an 8’ “MV” style mastarm.) 33’-3” actual luminaire mounting height.

Roadway mastarms
Type / V
V6 = 6’ extension
V8 = 8’ extension
“V” arms add 3’-3” to luminaire mount height

Roadway mastarms
Type / MV
MV6 = 6’ extension
MV8 = 8’ extension
“MV” arms add 3’-3” to luminaire mount height

Millerbernd Manufacturing Company
622 6th Street South, P.O. Box 98
Winsted, Minnesota 55395
dclark@millerberndmfg.com
Phone: (320) 485-2111
Fax: (320) 485-4420